BRAND | Höntzsch |
Product | VA40 |
Description | Vortex flowmeter model |
Internal code | OZH4588285 |
Technical specification | Ref: VA40/21.3-500GE 40 m/s 100 /p3 ZG7 Vortex VA flow sensor as in Drawing 7, sensor part rectangular, width between corners 40 mm Air/gas measurement range: 0.5... 40 m/s, actual flow velocity v Working temperature range: -20... +100 °C Maximum working pressure: up to 3 bar/300 kPa overpressure Materials: stainless steel, ceramic, sensor housing 1.4581, probe tube 1.4404, VITON, silicone free sensor Installation length: 500 mm fixed length Connection housing: AS80, L·W·H = 80 x 80 x 60 mm Protection system: IP68 sensor connection housing IP65 with integrated probe guide part SFB 21,3 E-53/G 1½” ZG5 SF probe guide piece for connection to pipe or valve sleeves ball with internal thread G 1½”. Fixing the probe using clamping bushing. Ball valves can only be closed after the probe is removed. Installation length: approx. 53mm Through hole: 21.3 mm Material: Stainless steel Seal: VITON, PTFE clamping bushing Connection thread: external thread G 1½” thread length 22 mm Calibration values v/t: 6 values Calibration medium: air with integrated UVA transducer Output flux: 4... 20 mA, max load 400 ohms Output: open collector, max. 50mA, limit value v or pulse quantity, max. 27 V DC RS232 interface: to configure parameters with software UCOM Power supply: 24 V DC (20... 27 V DC) Connection: GO 070 surface-mounted connector, for cable with |
Press on flag images to see contact information!