(Flange fitting RM-type C14J-120/220 B1, B 1.4571-3.1 Connection head: Form BKD-RPH, IP 65 screw A2 Cable gland: M20 x 1.5, blue Neck / Shroud: mm ø14x2,5, W.-Nr.1.4571-3.1 B Extension Length: 120 mm Flange: Form B1, PN40 / DN25 : Mat 1.4571-3.1 B Installation length: 220 mm Rejuvenation: 40 mm ø 9x1 mm Inspection certificate: EN 10204 - 3.1 B)
(Protective tube with flange B1 RM-type 21.3 / 15.8 / 8.5, 115/500, 1.4876 - 3.1 B Connection, head end: M24x1,5 Shroud: 21.3 x 2.8 mm Ø W. no. 1.4876-3.1 B (Incoloy 800) Flange: Form B1, PN40 / DN40, EN 1092-1 W. no. 1.4571-3.1 B Rejuvenation: 50 mm x 3.7 mm ø15,8 W. no. 1.4959-3.1B (Incoloy 800 HT) Overall length: 636 mm Neck tube length: 115 mm from Allen Installation length: 500 mm Accessories: ring and seal Inspection Certificate: EN 10204 - 3.1 B)
Insulated resistance thermometer 2 x Pt100 / 0 RM-type B-15x2 / 6-365 / 35-400-1.4571 Measuring tip Ø6x35mm lg. 1.4571 m. Schutzro.verschweißt Connecting head: B-M24x1,5 / M20x1,5 Shroud: Ø 15 x 2 mm W. - 1.4571. Coat - measuring insert: WMM 5.0 / 6,0-2Pt-B-435 Coat - Material: Stainless steel W. - No. 1.4541. Coat - Ø: 5.0 mm : Measuring tip 50 mm reinforced : To Ø mm 6,0, W - 1.4571. Measuring insert: 435 mm Measuring resistance: 2 x FS Nominal length: 400 mm Special I: thermowell Ø15x2 is mm with the : Coat - Feeler : welded Special II: measuring insert is NOT interchangeable Special III: free probe tip Ø6,0 x 35 mm long W. - 1.4571. Limiting error MW: DIN EN 60751 class B. Drawing - No: 2-1506-00011.
Insulated thermal wire 1 x NiCr-Ni (type K) RM-type TT-465-2K-0,22l-IEC, cl. 1
(Mantel-NiCr-Ni, RM-Type: AL-RT-KB-3,0-6000-10, Kl.1, RT 4.5, copper braid: TG-412-2KX-0.25L, length: 10 m, casing material: Inconel 600, sheath diameter: 3.0 mm, length: 6000 mm, limit deviation: DIN IEC 584 Kl.1, feature: Anschweißplättchen, dim 4,5x6x18, bend protection, drawing no.:. 2-4005 -00,009)
Thermocouples
Certificate Acc. EN 10204 - 3.1
(Screw-Widerstandsth. 2 x Pt100 / 0 RM-type B8J-0/100, R1 / 2 ", 1.4571, connecting head: Form B, die-cast aluminum CABLE GLAND. : Plastic, gray (IP68) Liner: 8x1 mm : Mat 1.4571 stud: G1 / 2 "W-1.4571 Measuring Insert: WMR 810-2Pt-B-140 Installation length: 100 mm Limiting error DIN EN 60751 class B. Operating temperature: -50 to + 400 ° C Special> ME non-replaceable)
Insulated thermocouple 1 x NiCr-Ni (type K) RM type ALSTE KB 1,0-600-3, Kl.1, TT-465-IEC TS KM (HT) green with QM-3,2-HT
Insulated thermal wire 1 x NiCr-Ni (type K)
Insulated thermal cable
Immersion-Mineral-Insulated-Resistance-Thermometer
Adjustable flange
Immersion-Mineral-Insulated-Resistance-Thermometer
Measuring insert thermocouple NiCrSil-NiSil
Mantel-Widerstandsthermometer
Exhaust Temp RTD
Immersion jacket resistance thermometer